Post Tagged with: "digital sign"

How to build a 30′ by 200′ digital billboard.

Media Resources builds and installs one of Canada’s largest digital LED displays Paid Advertisement

by John Weller· · 0 comments · Digital Signs

Montville Allows One of Two Proposed Digital Boards

Outfront Media had a request last week before the Montville NJ Township Zoning Board to replace two static billboards for new digital billboards.  Tap into Montville reported that a proposal on #1 Route 46 East would replace a two-sided 238 square foot board that had been in place for 60 years with a new single face 231 square foot digital. The proposed replacement on #86 Route 46 West was a straight swap from a static to a digital of equal […]

by John Weller· · Comments are Disabled · Regulations

Auburn, Mass Selectmen approve two digital signs

“I think it’s great for the Auburn Mall, I think it’s great for the town, I think it’s going to be a great thing all around,” – Auburn Selectmen Chairman Kenneth Holstrom quoted in the Telegram after unanimous approval of two, two-sided digital billboards. The Telegram reports that the Auburn Mass selectmen have approved a zoning bylaw amendment to permit the erection of two 2-sided digital signs at the Auburn Mall.  Total Outdoor will construct and operate the signs.  The […]

by billboardinsider· · Comments are Disabled · Digital Signs

A Step By Step Billboard Installation

Here are some pictures from a challenging two sided 14 by 48 digital sign installation on the Florida State Fairgrounds in Tampa Florida.  Selective Structures did the fabrication and install.  Formetco supplied the digital sign.   The installation was complicated because it occurred in an extremely wet area next to a pond. Here’s a picture story of construction. Constructing a road to the site due to the wet ground.   A steel sleeve was inserted into the ground to prevent the foundation from […]

by billboardinsider· · Comments are Disabled · Digital Signs