A Step By Step Billboard Installation

Here are some pictures from a challenging two sided 14 by 48 digital sign installation on the Florida State Fairgrounds in Tampa Florida.  Selective Structures did the fabrication and install.  Formetco supplied the digital sign.   The installation was complicated because it occurred in an extremely wet area next to a pond. Here’s a picture story of construction.

Constructing a road to the site due to the wet ground.

selective tampa road

 

A steel sleeve was inserted into the ground to prevent the foundation from collapsing.  The sleeve was 10 feet high.

selective sleeve 1

The sleeve was cut off 2 feet above the ground.

selective tampa sleeve in ground

Drilling the foundation.

selective tampa drilling

The foundation was 36 feet deep.

selective tampa drilling

The sign structure arriving.

selective tampa billboard arriving

Setting the base column.

selective-photo-6

The base column in the ground.

selective tampa 7

The faces were were assembled on the ground and then lifted in place.

tampa-billboard-assembly

Here is the completed 2 sided 14 by 48 20 mil Formetco digital billboard.  Congrats to Selective Structures and Formetco for a successful install.  The billboard is owned by Link Media.  You can see the pond next to the structure.

selective completed tampa board


Paid Ad

impact-otr-dallas-only-bb-insider

Print Friendly, PDF & Email

Comments are closed.